Header Ads

How to Switch Vaping Modes of iKonn 220

How to Switch Vaping Modes
When the device is powered on, press the fire button 3 times in quick succession, the device will display current vaping mode. Press the “+” or “-” end to switch among VW, USB Charge (this mode appears only when “USB” is on), TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, TCR-M3 modes and then press the fire button once or stay in the interface for about 10 seconds to confirm the vaping mode you chose.


Eleaf iKonn 220W

1) VW mode: 
When set in VW mode, the device can support a coil whose resistance is within the range of 0.1ohm-3.5ohm.
Adjust wattage: in this mode, the output wattage can be adjusted from 1W to 220W by pressing “+” end or “-” end, “+” end to increase and “-” end to decrease. Long press “+” or “-” end can rapidly increase or decrease the wattage level.

2) TC-Ni/TC-Ti/TC-SS/TCR(M1, M2, M3) Mode: 
When set in TC-Ni/TC-Ti/TC-SS mode, the device can separately support Nickel 220, Titanium, and Stainless Steel 316 coils. In TCR (Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range. (Resistance range of coil: 0.05ohm-1.5ohm)

The Setting of TCR Mode (M1,M2,M3)
when the Eleaf iKonn 220W Box Mod is powered off, keep pressing the fire button and the “+” end simultaneously, then you will enter into the TCR (M1,M2,M3) set menu:
1. Press the fire button to choose among M1, M2 and M3 modes;
2. Press the “+” or “-” end to increase or decrease the TCR value according to the material of the coil you use;
3. Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting.

No comments

Powered by Blogger.